SYRINGE Pump NE 1000 FROM NEW ERA PUMP, USA

Features of the NE-1000 Family of Syringe Pumps

• Fully programmable; automation capable
• Operates stand-alone or from a computer
• Infusion and withdrawal
• Set a single pumping rate and/or dispensing volume

• Program up to 41 pumping phases that change pumping rates, set dispensing volumes, insert pauses, control and respond to external signals, sound the buzzer

• Network, control, and monitor up to 100 pumps with one computer
• Create expandable and reconfigurable automated fluid dispensing systems by attaching pumps to each other
• Worldwide power supplies available
• Dispensing accuracy of ± 1%
• Unlimited lifetime technical support
• Two year warranty

NE-1000 Family Detailed Features

Setup as easy as 1-2-3-4!
1. Set syringe diameter.
2. Set dispense rate.
3. Set dispense volume.
4. Press start.

Simple Features

• Infuses and withdraws
• Selectable pump rate units: µl/hr, µl/min, ml/hr, ml/min.
• Infuses and withdraws
• Selectable pump rate units: µl/hr, µl/min, ml/hr, ml/min.
• Change pumping rate and direction while pumping.
• Dispense a specified volume.
• Syringe purge mode will infuse or refill syringe at top speed to purge air from the line or to fill the syringe.
• Audible buzzer can be programmed to alert when an alarm condition occurs or the pumping program completes.
• Power failure mode restarts a pumping program interrupted by a power failure.
• Stall detection stops pump when the motor's operation is impeded (not on NE-500 model)
• Non-volatile memory restores all setup parameters and the pumping program, on power up.
• Elastomer raised keypad with optional beeping whenever the keypad is pressed.
• CE certified

Production Productivity Features

• Pre-program a set of production dispensing protocols. The operator then selects the required dispense protocol
• Keypad Lockout: Prevent unauthorized or accidental changes to the settings by requiring a "Lockout Disable" key to be inserted to change settings.

Pump Programming

• 41 programmable phases

• Enter programs from the keypad or from a computer. Download or upload pumping programs from or to a computer. Store dispensing programs in a file on your computer, then download them to one or more pumps. Specify in the file to send a different pumping program to each pump in the pump network.

• Pre-program dispense volumes. Each volume can be different.
• Automatically change pumping rates or pumping direction.
• Ramp up or down the pumping rate.
• 41 programmable phases
• Enter programs from the keypad or from a computer.

• Download or upload pumping programs from or to a computer. Store dispensing programs in a file on your computer, then download them to one or more pumps. Specify in the file to send a different pumping program to each pump in the pump network.

• Pre-program dispense volumes. Each volume can be different.
• Automatically change pumping rates or pumping direction.
• Ramp up or down the pumping rate.
• Set timed delays between dispenses.
• Automatically pause the program and wait for the user to continue the dispense.
• Synchronize dispenses with other equipment or pumps to change pumping rates in reaction to a sensor or signals from other pumps.
• Send logic signals to other equipment. Change pumping rates in reaction to a sensor.
• Program the audible alarm to beep at any time to alert the operator.